Product Spotlight

image1
The S9X2 Furnace
The second model in the S-Series family, the S9X2


J & S AIR INC BBB Business Review
J & S AIR INC BBB Business Review

Help And Tips

Dealing With Mold
Mold has become an increasing area of concern for many homeowners in the past few years. The following brief description and prevention tips target this area of concern in regards to general mold awareness and ways to avoid its presence.

Introduction to Mold
Molds, a subset of the fungi, are ubiquitous on our planet. Fungi are found in every ecological niche, and are necessary for the recycling of organic building blocks that allow plants and animals to live.

What are Mold Spores?
Mold spores are tiny bacteria less than 4 microns in size – so small that as many as 250,000 spores can fit on a pin head and a person can inhale as many 750,000 of these spores per minute! They are produced by microorganisms which grow in moist hay and stored grain silage where the moisture content is high (30%) and the area is poorly ventilated.

Prevention
The key to mold control is moisture control. Solve moisture problems before they become mold problems!

Mold Prevention Tips

  • Fix leaky plumbing and leaks in the building envelope as soon as possible.
  • Watch for condensation and wet spots. Fix source(s) of moisture problem(s) as soon as possible.
  • Prevent moisture due to condensation by increasing surface temperature or reducing the moisture level in air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).
  • Keep heating, ventilation, and air conditioning (HVAC) drip pans clean, flowing properly, and unobstructed.
  • Vent moisture-generating appliances, such as dryers, to the outside where possible.
  • Maintain low indoor humidity, below 60% relative humidity (RH), ideally 30-50%, if possible.
  • Perform regular building/HVAC inspections and maintenance as scheduled.
  • Clean and dry wet or damp spots within 48 hours.
  • Don’t let foundations stay wet. Provide drainage and slope the ground away from the foundation.
ac service
Request A Quote
We are standing by, ready to meet your Heating and Air Conditioning needs. We provide a free, no obligation quote for Replacement Units and New Construction. Request a quote today!